Technology Gives A Cutting Edge In Cutting Sheet And Plate Metals
Topics: sheet, plate, metal, laser, plasma, cutting, technology
Technological advances in the field of manufacturing are what companies use to gain and maintain a cutting edge over their competition. Thirty years ago no one would believe the technologies of James Bond and Star Wars would find their way to the metal fabricator’s shop floor; but they have. Two innovative alternatives to burning or oxidizing sheet and plate steel are:
* Laser Cutting of steel
* Plasma Cutting of steel
Laser technology gained much ground in the 1980′s through Defense Department research. The Strategic Defense Initiative (SDI) paved the way for today’s advanced commercial applications of laser use.
Laser is a word derived from Light Amplification by Stimulated Emission of Radiation. It involves the use of an electronic optical device. In the case of steel, output from the device, the laser beam, targets an area of the sheet or plate. This laser stream receives its direction from a computer, which pinpoints the area requiring the cut.
Cutting steel with a laser-cutting machine offers an accurate clean cut. Many other materials benefit from this process, such as wood, copper and exotic alloys. Sheet and plate steel receive cuts of close tolerance, much faster than traditional cutting methods. Laser cutting machines are capable of cutting steel up to one inch thick. These machines can perform these accurate cuts repeatedly and with high consistency.
With laser cutting, the cut edges of the steel are clean. This leaves a cut edge with a nice surface finish. This type of cutting allows for less warping of steel; as the zone affected by the heat is small. Laser applications mean less physical contact with the sheet or plate steel. This means less wear on the steel being cut and less chance of a poor quality cut.
Another great advantage of laser cutting of steel is that there is no wear on the laser. This is an advantage over mechanical cutting tools, which undergo stress and wear in the cutting process. If proper maintenance is performed on the optical mirrors used to reflect the laser beam to its target, many months of use are possible before they must be replaced; unlike standard tooling.
Plasma cutting machines utilize a different process. A plasma cutter or torch uses inert gas or compressed air. It uses pressurized nitrogen, argon, or oxygen. Today the use of compressed air is more common.
This air propels at high speed from the cutter nozzle. As air rushes through this specially designed nozzle, an electrical arc develops. This air hits the surface of the steel sheet or plate. Some of this air (or gas) turns to plasma: plasma that is very hot and able to melt the steel receiving the cut. Because it moves at high speed, the plasma blows away the molten metal. This blowing away of molten metal is the cutting process in action.
Plasma cutting machines can cut steel of one inch or less. The plasma cutting process can make non-linear or curved and angled cuts. It works faster on thinner steel than the burning or oxy-fuel process. Any conductive material (ability to transmit electricity) can have the plasma cutting method applied.
The introduction of smaller nozzles and thinner plasma electrical arcs are the result of advances in plasma technology. These produce cut edges close to the quality of those produced by laser methods.
The use of laser and plasma cutting machines give manufacturers the ability to make cuts that are more precise. It also gives them the capability of making different types of cuts, all with greater speed. This helps the efficiency of their operations in the competitive business climate of today.
The steel industry continues to be on the cutting edge of steel cutting technology. And lasers and plasma cutters are one of the methods they employ to stay there.
Billy Kite is a researcher writing on behalf of www.premiumsteelsales.com.
Previous Articles Highlighter:
Keep Outsourcing Relationships Short Term (1)
No matter how discounted the consulting price is, the client didn't get a good deal. This kind of arrangement can be pretty hard on organizational morale, especially during hard times.
Are You Sure You Want To Start A Home Based Business? (2)
The main difference, however, is that in your own home based business you will probably get paid to do something that you love. Today more than ever, people are starting home based businesses.
A Dining Experience In The Maldives (3)
Fresh fish and other seafood are commonly featured in Maldivian cooking, complemented by various imported ingredients that lend it international flavour. Tuna, swordfish, grouper, red snapper, and octopus are always available in the restaurants dotting the island's tourist locations.
Are Job Applicants Destroying Your Brand? (4)
You interview a sales candidate and for whatever reason elect not to hire them. The candidate has a less than favorable experience with your company during the interview process leaving a bad taste in his mouth.
Cheap Holidays To Cyprus To See Ayia Napa Attractions (5)
Besides the water park and the fishing village, you can also enjoy the tombs and beaches in the area. The Markronissos Tombs are located right near the beach, so you can visit the tombs and then spend the rest of the day on the beach soaking up the sun.
Great Business Is Great Marketing (6)
Everything else is subsidiary to the marketing drive from the way the sales people act to every piece of publicity material. Marketing just saturates successful companies. And this illustrates dramatically to customers and prospective clients what makes the company different, what makes it stand out from the competition.
Culture And History Are Part Of Your Holidays To Luxor (7)
It is amazing walk and gives you some insight into the earlier customs and culture that was once practiced in Luxor. Holidays to Luxor are always exciting when you do things like this.
Foreign Buyers Can't Get Enough Of New York City (8)
Topics: new york apartments, new york city real estate I would imagine that at some point soon, the Treasury Department and the Federal Reserve will start receiving thank-you notes from New York City realtors: The falling dollar has made New York apartments an incredible value for those that earn their salaries in currencies other than the US dollar.
6 Tips On How To Provide Better Customer Service (9)
I don't know whether you realized or experience it or not, something you do today can come back to haunt you tomorrow. So always treat everyone with polite manner and with respect.
Get The Best Registry Cleaning Software (10)
Your computer's memory will even store notations on every uninstalled program and most deleted files. Over time, this residue grows in size and the number of unused information in your registry can become massive in a short amount of time.
Newer Articles Highlighter:
Why Pay Late Fees On DVDs When You Have Online Rental Companies? (1)
Just think about it you pay about $20 a month and you get all the movies that you can think of to watch. It's better then renting all the movies that you want then forgetting about them then just having to pay for them all in late fees.
The Advantages Of Having A Forum (2)
This also means that they are more likely to recommend you to other like minded people. From a business point of view one of the biggest benefits of having a forum is that means you can get potential customers' email addresses and other details.
7 Ways To Kickstart Writing Your Book This Year (3)
Are they willing to spend $15-20 on a book like yours? Do this and you're on your way to selling more books than you dreamed. 3. Write your book's central thought and support it with your book.
Why Bungee Jumping Has Spread Into The Mainstream (4)
I am pretty sure that you can find a place that does bungee jumping. If you cannot then you can go to a theme park and they may have something similar to what bungee jumping is.
Why Everyone Is Talking About Sales Training (5)
Negotiation training programmes teach a great deal of techniques that will help improve negotiation skills. The first area upon which training will be focussed is planning and preparation. This will teach your staff to set negotiation strategies, consider objectives, examine power bases, plan to address the balance of power, plan for stalemate, identify levels of concession, set negotiation limits and select appropriate negotiation limits.
Fun At SeaWorld San Diego: What You Don't Want To Miss (6)
Our kids learned so much about aquatic life during our day at SeaWorld San Diego. They had so much fun, they didn't realize how much they were learning. Sea World is certainly an attraction my family will visit again and again.
Watch Repair - Be Smart When Your Watch Needs To Be Fixed (7)
Watches that are inexpensive (typically $20 or less) are typically constructed so that they are unable to be repaired. Watches such as these are normally a one shot deal, and if they are broken or cease to function for whatever reason then they will need to be discarded and another one will need to be purchased.
Mompreneurs Are On The Move (8)
With the help of the tips presented here, may you have a prosperous and enjoyable work at home experience. Christa Louw helps moms to balance their stay-at-home lifestyle with the Perfect Business for moms.
Don't Start With A Blank Page, Use Content Blocks (9)
-Mission Statement: no more than three sentences -Company Objectives (stating where business income comes from in percentages) -Positioning Statement: contextual reference -Promotional Strategy: how do folks hear about you? -Sales Literature: include links to websites,PDF documents, audio files, video files -Target Clients: describe who is your target client -Technology overview: are you high or low tech?
How To Build Up Your Wealth? (10)
Besides, you should never put all eggs in one basket. You have to set up your own investment portfolio based on your risk assessment. You will allocate a certain percentage of your money on purchasing stocks.
Permalink to Technology Gives A Cutting Edge In Cutting Sheet And Plate Metals