Metal Cleaning: Washing Long Aluminum Skin Panels
Keywords: parts washer, sheet metal fabrication, sheet metal fabricator, metal fabricator, parts cleaner, high
Large, aluminum door panels can be difficult pieces to clean. Used in many applications, including the construction of the United States Army’s Hummer vehicle as a skin to be placed over the armor plate frame, these panels need to be cleaned quickly and efficiently. This article will serve as an example of how one manufacturer was able to replace an outdated and inefficient washing system with one that cleans more effectively and the steps that went along with the transformation.
The original washer had a load/unload stage of 5′, a wash stage of 16′, and a spray length of 12′. The overall dimensions of the machine measured out to 7′ W x 8′H x 76′L. The machine had a 600-gallon washer tank, a 5,000,000 BTU/hr heater size and design, and a pump size of 481GPM running at 15 PSI. By decreasing some of these measurements and using a more efficient design, the overall design of the washer will be reduced and operating costs will be lowered, along with an increase in production and quality.
First, the loading and unloading stages of the machine will be increased from the original 5′ to 8′. By adding three to these stages the operators will have the benefit of increased safety while maneuvering the larger panels. The wash stage will be reduced, from 16′ to 12′. The smaller length will make it easier to clean the tanks, as well as keeping the gas burner immersion tube to a minimal dimension. Still, the 12′ length will allow a 10′ panel to drain before moving on to the next stage in the process. Once loaded, the parts will move through the system in one of two separate lanes, which are both driven by a single, common drive motor. The lanes will consist of flat wire belts on a roller bed, driven by the motor at approximately 8 feet per minute. Adjustable guide rails in the tall lane will allow the machine to handle 3 different widths of the panels.
Spray length will be reduced from 12′ to 8′. By decreasing the pump size, from 500 gallons per minute to 300 gpm, but running at a higher PSI, 40 instead of 15, the spray length can be reduced without a drop in wash quality. Since the washer tank has been increased from 600 to 1000, the pump must be size appropriately. Tank volume cannot be less than 3 times the total pump volume or else you can possibly run the pump dry. In the previous configuration, the tank was 600 gallons and the pump was running at 481 GPM, which is not the correct ratio. A 1000-gallon tank and 300GPM pump is more appropriate. The increase in PSI makes up for the decrease in gallon per minute flow and spray bar impingement time. Also, by installing a larger tank, the time before the tank becomes saturated with soil and stamping lubricant is increased, thereby decreasing the amount of time that production must be stalled in order to clean the machine.
In terms of maintenance, the spray stages will also be easier. The pump will be a vertical barrel mount pump, which can be removed without draining the tank. The spray nozzles are quick change, for easy maintenance. The nozzles and headers are customized to optimize the coverage of parts as well.
After the wash stage but before the rinse stage, a blow off feature is installed that was not present on the previous machine. Using a stripping air knife system running at 25 horsepower and delivering up to 600 cfm of air, the parts will be stripped of excess or puddles of water before being sent to rinsing. This stage helps to prevent the cleaner from being carried over to the rinse tank from the wash tank, thereby making the rinsing stage more effective. There will always be wash water rinsed off into the rinse tank, but carrying the water on the part and dumping it into the rinse tank makes the rinse tank just another part of the wash tank and diminishes efficiency and efficacy.
After a rinse stage that removes any left over contaminant or cleaner, the parts will move along into the final blow off stage. High velocity regenerative blowers will be used to strip the excess water from the parts. The air manifolds, which utilize air knives with directional nozzles that create a curtain of air, will be mounted parallel to the spray headers. The blow off stage is further enhanced by the addition of a heated blow-off for 2 of the blowers. These heated blowers will be adjustable up to 200 degrees and enhance flash drying. With the increased PSI and more efficient air knives used in the blow off stage, the length will be decreased from 24′ down to just 12′. By increasing the power of the blow off stage and effectively concentrating it, length is reduced in half and keeps the footprint of the machine small.
Additional monetary savings will be made when the heater used in the machine is replaced. In the old machine, a 5,000,000 BTU/hour heater was used. This was necessary in order to maintain a steady temperature using a 500 gallon per minute pump flow. In the new design, a 3,000,000 BTU/hour system is installed. This results in 2 million less BTUs expended per hour of use and decreases monthly energy costs.
Finally, by using two lanes for washing and speeding up the conveyor, the washer and therefore the heater only need to operate 8 hours per day. This is 2 times less than the 20 hours the old machine was operating. Using the newest technology available, the burner operates at a higher efficiency rate as well, further reducing costs.
The overhaul of this particular wash process illustrates how new technology and an experienced vendor can help a manufacturer save money and increase productivity. With the advances made in washing technology and design, it is worthwhile for any company to investigate whether they could benefit from a change in process. In this example, the footprint of the machine was significantly reduced while efficiency was increased and operating costs were decreased.
Midbrook is a minority owned provider of parts washer and parts cleaner systems, custom metal fabrications, CapSnap water bottling systems, and production cleaning services. Visit us at www.midbrook.com
Previous Articles Highlighter:
Bad Credit Debt Consolidation: Tackle Your Debt Head On (1)
Its easy to see why a trustworthy lender is needed for a bad credit debt consolidation. After all, you dont want to hand over your hard-earned money to someone who wont cover your payments.
Where To Find And Buy Some Of The Best Quality Perfumes (2)
Then you can do so in the store or online. When shopping for perfume in a department store, tell the clerk the brand that you like the most and she will be able to provide you with different samples of similar brands.
Employment Opportunities For Freelance Translator (3)
If you want to stand out of these great numbers, you must develop and effective strategies to succeed in it; there is an intense competition around the net. Having a degree in translation, translation experience, and exceptional language skills, can really help you to gain an great online trust and confidence from potential clients.
Do Unpaid Medical Bills Show Up On My Credit Report And For How Long? (4)
Doctors are very quick to send their patients to the collection agencies because they don't have the man power to keep calling that person for a long time. Not that doctors don't want to help you, they just cant help everyone.
Effective Ways To House Training Your New Puppy (5)
For this reason your reprimand should be firm but not too harsh. A simple one word 'No' or 'Stop' will suffice but there is no reason to go over the top.
Forex Currency Trading -The Latest Vogue (6)
Such knowledge will help you in predicting the market tendency much more accurately. Experts in the field always recommend beginners to initially go in for smaller accounts and then gradually move on to higher accounts.
How To Discover Your Niche Market (Part 1) (7)
How Much is One Great Resource or Tip Worth to Your Business? Corrisa malone has accumulated the best basic resources to get the newbie off and running making money in their home-based business on the Internet.
Consolidating Student Loans Under $10,000 (8)
Then consolidate your loan immediately to lower your repayments. But make sure your lender allows you to add additional federal loans in the future and you'll be set for your studies.
Choosing One Of The Many Tuscany Rental Villas (9)
But if you want something that will really take you into the spirit of the land, there are many Tuscany rental villas that can literally take you back in time with its innate charm and grandeur.
Online Paid Survey Tricks And Tactics (10)
So, what is exactly market research? It's where companies get the opinions of consumers about certain products either before they are launched to know what market to launch it into, or existing products to find out what needs to be done to revamp and improve them.
Newer Articles Highlighter:
My First Gardening Experience (1)
I almost decided to change my casual hobby into anything rage-inducing topic that you can possibly say to me. It began with a couple of weeks after I transferred in to my first house.
Modern Area Rugs - Great For Making A Room More Lively (2)
When you are choosing a modern area rug to have in your living room it is more a matter of your taste than anything else. You are able to get modern rugs that have bold patterns, bright colors, and easy to take care of materials.
Understanding Local Car Auctions (3)
Keywords: car auction, car auctions Buying cars from auctions can end up in a profit or a loss depending on your understand on cars and how the car auction process works.
How Do I Get A Loan WIth Out A Home To Mortgage? (4)
It is important to have someone who can back you up when financial problems do arise and will still enable you to pay the monthly loan payment. Having a cosigner with a lot of credit and also a good credit report ultimately increases your chances of obtaining a business loan.
Multiple Uses Of An Expired Domain Name (5)
c) The power of selling: A good expired domain name is a powerful tool that can result in very handsome gains to you. Recently, trading in them is getting popular as a mode of earning large profits.
Questions You Need To Ask Yourself If You Are A First Home Buyer (6)
Craig Adams has worked with first home buyers for over 10 years. Dont miss the opportunity to finance your next real estate purchase. Find out how a good finance package can change your, at my website which is at www.fitfinance.com.au
Can A Teenager Get A Car Loan? (7)
You need to have an established credit history. You need to know how to pay the car buying game as well. What do I Need to do First to Get my New Car First of all you need to check your credit.
General Trading Companies - 4 Reasons Why Novices Should Take The Help Of GTCs (8)
When selecting a broker (if) to work with, do make sure you have a little background info on the company or individual. Make sure they have enough time to answer all queries you may have.
Real Life Adventure Is Not Limited To Exotic Places (9)
I even came back before my 10 days was up. On every other trip I had ever taken I was always late getting back home. The reality was I just wasn't the same person I was 20 years before.
Commodity Trading Simulation - Using The Power Of Software To Practice Trading Right From Home (10)
The veterans will tell you there is no better way to practice than get a taste of the real thing. This is obviously true; but why not get a little basic simulated practice before you practice in the real world?
Permalink to Metal Cleaning: Washing Long Aluminum Skin Panels