Six Sigma Redundancy Analysis
Keywords: Six Sigma Redundancy Analysis, 6 Sigma Redundancy Analysis, Redundancy Analysis, six sigma analysis,
Innovation is necessary for the survival of a business organization and for its future growth and development. Successful businesses make it a point to use innovative methods and techniques for meeting and even exceeding customer needs and expectations.
However, one must always remember that using innovative techniques may not always give the desired results and may sometimes even lead to failures and redundancies. The same is applicable to Six Sigma implementation tools and techniques that aim at reducing defects and improving quality.
Identifying Causes Of Redundancy
The fact that a Six Sigma technique was successfully utilized in a particular business does not necessarily guarantee its success in all other organization. The general tendency is to employ Six Sigma concepts and techniques in any given process where an opportunity exists for reducing wastage. Employing the process without ascertaining the effects it can have on the business process is often the main cause of redundancy. This is why certified professionals analyze the techniques that were employed for finding out the root causes of redundancies.
However, finding the exact cause may not always be easy because implementations are achieved through multiple trials and errors spread over 4 to 6 months depending on the type of project. For ascertaining the root cause, certified professionals often look into various areas such as Choice of projects, Statistical process control, Assessment of measurement system, Analysis of variance using ANOVA, and Failure Modes and Effects Analysis (FMEA).
In addition to these, certified professionals also refer to the documents that were created during the implementation stage. Finding the root cause is a completely different function and is not related to Six Sigma audits that are fundamental to DMAIC and DMADV methodologies.
Resistance To Change: A Cause Of Redundancy
Although most redundancies are caused due to the use of wrong Six Sigma techniques, some redundancies may also occur due to the negative attitude of employees. Implementations are successful only when employees extend their full cooperation and support.
Employees often think that Six Sigma will ultimately lead to downsizing and as a result do not so much interest in the implementation project. Functional departments are also sometimes skeptical of these projects because it usually takes four to five months for achieving the desired results through the implementations.
Redundancy Analysis Tools
At present, no special tools are available that are specifically designed for finding the root causes of redundancies. Some certified professionals may utilize TRIZ (Theory of Inventive Problem Solving) for identifying root causes, but most other professionals use the same basic tools that were utilized during the implementations. The faultfinding procedures that were used during the implementations can be repeated for finding the existing causes of redundancies.
For ensuring the success of redundancy analysis initiatives, it is important that a senior employee, who has been working for the organization for a considerable period, handles the task. This employee will have thorough knowledge about existing systems and processes and as such, it would be easier for him to search and locate the root causes that are causing the redundancies. The additional benefit is that such an employee is most likely to have better relations with other employees of the organization and can help in changing the mindset of employees who have a negative perception about the Six Sigma implementation project.
Tony Jacowski is a quality analyst for The MBA Journal. Aveta Solution’s Six Sigma Online ( www.sixsigmaonline.org ) offers online six
sigma training and certification classes for lean six sigma, black belts, green belts, and yellow belts.
Previous Articles Highlighter:
Essential Six Sigma Software (1)
This way the organization will be able to ensure the success of Six Sigma implementation projects. Tony Jacowski is a quality analyst for The MBA Journal. Aveta Solution's Six Sigma Online ( www.sixsigmaonline.org ) offers online six sigma training and certification classes for lean six sigma, black belts, green belts, and yellow belts.
DMAIC And Project Planning (2)
Tony Jacowski is a quality analyst for The MBA Journal. Aveta Solution's Six Sigma Online ( www.sixsigmaonline.org ) offers online six sigma training and certification classes for lean six sigma, black belts, green belts, and yellow belts.
Customer-Supplier Relationships For Lean Six Sigma (3)
Therefore, in most instances of such customer-supplier situations, one being unaware of the requirement of the other, they maintain whatever is supplied as standard, even when the change would not require much cost or effort - resulting in loss to both.
Upright Vacuum Cleaners May Be The Best Choice For Your Home (4)
Some attachments are better than others, so when looking around for an upright cleaner, you will need to consider whether the attachments are useful for the purpose that the vacuum will have in your home.
Main Reasons For Using Vacuum Cleaners With Bags (5)
For example: 1. They can be very messy and prove to be a complete nuisance, when full. 2. Also, one cannot actually know when they are full and ready for use.
A Unique Way Of Getting A Kirby Vacuum Cleaner (6)
Keywords: vacuum cleaners, kirby, vacuums, cleaning Kirby vacuum cleaners are one of the most reliable names in the vacuum cleaner market today. They come in many different models along with numerous parts, accessories, and bags that they manufacture.
Your Must-Know Guide To Commercial Vacuum Cleaners (7)
Models for Fine Powders - These units are capable of filtering fine powders such as carbon black, talc, pigments, oxides, and plastic compounding dusts. 5. Models for Spill Recovery - Spill recovery units are typically large vehicle transport designed to reclaim or recover large spills.
Minimum Information That You Need To Know About Vacuum Cleaner Belts (8)
Although it is wise to check this type of belt at least once per year, most people do not replace this particular item until it snaps or breaks. Grooved belts have grooves on the inside of the belt, which are commonly used with Simplicity Uprights models.
How To Become A Fighter Pilot (9)
He also would be required to apply for pilot's training after becoming an officer similar to others. Since you are required to begin your pilot's training before the age of twenty-seven, this gives you limited time to become a fighter pilot.
Six Sigma Adoption And Cultural Issues (10)
In small organizations having less than hundred employees, it is easy to gauge the general mood of the employees by conducting personal interview sessions. In comparison, large organizations cannot even think about interviewing all their employees, as it would result in enormous wastage of productive time.
Newer Articles Highlighter:
Career In Media: Radio (1)
Tony Jacowski is a quality analyst for The MBA Journal. Aveta Solution's Six Sigma Online ( www.sixsigmaonline.org ) offers online six sigma training and certification classes for lean six sigma, black belts, green belts, and yellow belts.
The Six Sigma Audit Process (2)
For example, while auditing business processes related to the dispatch system, the process variations that are recorded in the operator's log are revealed during the audit. The variations are then compared to standard deviation for determining the full extent of the problem.
Best Entry Level Telecommuting Jobs (3)
No special skill or degree is required, however, certain skills like typing and computer programming are beneficial. Basic equipment such as a computer with an Internet connection and business phone line are necessary if not provided by the employer.
Bottlenecks In Six Sigma Implementation (4)
It is difficult for these organizations to speed up the implementation process, as they have to juggle between meeting existing obligations and overseeing the project implementation at the same time.
Risk Free Ways To Implement Six Sigma (5)
This is one of the fastest ways for employees to adopt to change models. The initial teams talk to the next target group and this connectivity does take time, but is effective.
Tennis For Beginners - How To Enjoy The Learning Process (6)
Tennis looks very simple when you watch a good player. But the road to mastery is long and it doesn't matter which area you are working on - tennis, piano or dancing.
Best Features Of Dyson Vacuum Cleaners (7)
The DC15 continues the use of the Root Cyclone Technology that was featured in earlier models of Dyson vacuum cleaners. The technology uses air at high speeds to push the dirt and debris to the sides of the container.
Deciding Factors In Vacuum Cleaner Ratings And The Currently Highest Rated Vacuums (8)
Bissell Lift-Off Bag less 3750 If you prefer bagless versions of cleaners, then this is the model for you. It is also a very good cleaner for floors and carpets.
Career As A Paramedic (9)
Tony Jacowski is a quality analyst for The MBA Journal. Aveta Solution's Six Sigma Online ( www.sixsigmaonline.org ) offers online six sigma training and certification classes for lean six sigma, black belts, green belts, and yellow belts.
A Guide To Better Bartending Jobs (10)
This way you can get more raises or opt for more top shifts. Bartending Schools And Training One of the easiest ways to doing a good job behind the bar is attending a Mixology School, also commonly known as Bartending School or Bartending Training, which is also available online.