Handyman Techniques Explained
Topics: home improvement idea, home foundation repair, home renovation
There are many jobs the home handyman must do, and below some of these are listed, with tips which will make these jobs easier.
Rust Removal
To remove small patches of rust from polished metals and tools, try rubbing the rusty spot with a hard typewriter eraser. The fine grit content of these erasers will polish out the rust, but will not scratch or otherwise damage the metal finish.
Renewing Putty
When putty that has been stored for some time is taken out of the can, it will often be too stiff to use easily. In most cases, kneading and slight warming will make it soft and pliable once again. Both can be accomplished by working vigorously between the hands. To avoid getting the hands oily and stained, place the putty in a plastic vegetable bag first. If the putty is exceptionally hard, a few drops of linseed oil placed inside the bag with the putty should do the trick.
Using Putty
Fresh putty has an annoying tendency to stick to the hands when used for filling nail holes in exterior woodwork, or for replacing a broken pane of glass. To prevent this, rub a little powdered whiting (available at all paint stores) or a little flour on the hands before starting.
Removing Damaged Screws
If a screw slot gets so damaged when the screw is part way out that it can no longer be gripped with the screw driver blade, use a hacksaw to cut a new slot at right angles to the old one. A narrow-bladed screwdriver can then be used in this new slot, and will permit backing the screw the rest of the way out. Another trick that usually works is to grip the outside of the screwhead with a locking-type pliers, then use this as a wrench to turn the screw out of its hole.
Broken Screws
When a wood screw breaks off below the surface of the wood it is almost impossible to remove it without damaging the wood. Rather than trying to get the screw out, drive it deeper by hammering with a nail set. Then fill the hole with plastic wood and start with a new screw.
Save Sawdust
When finishing hardwood cabinets or wall panels where a great deal of sanding is required, the wise handyman will save the sawdust and store it in glass jars or clear plastic containers. When mixed with glue and water later on, the sawdust makes an excellent crack or nail hole filler which will blend in perfectly with the natural wood.
Space for Expansion
When putting up large sheets of wall paneling, the home handyman should avoid butting sheets together too tightly. A slight gap is necessary to allow for expansion and settling action later on. Besides this, sheets which are forced tightly together will often buckle or warp later on when pressure builds up due to natural expansion of the panels in humid weather.
Prevent Dents
When forcing tightly fitted pieces of finished wood together, avoid striking with a metal hammer since dents or other marks will result. A handy way to do this is to slip a rubber crutch tip permanently over the hammer handle end. The handle can then be used as a “persuader” for tapping or forcing. pieces together by rapping sharply with the rubber-tipped handle end.
Man-Sized Thimble
When a handyman is faced with the occasional job of sewing canvas or other heavy materials which call for use of heavy needles, a thimble to protect the finger-tip can be quickly improvised from adhesive tape. Wrap several thicknesses around the finger, doubling it over several times at the point where pressure must be applied.
Clip It On
A nail set is a frequently used tool whenever carpentry is being done. However, because of its size it is continually being misplaced or lost. To keep it always handy, slip an inexpensive pencil clip over the shank so that it can be easily clipped on to your pocket much like a fountain pen or pencil.
Try some of these methods and you will make your repairs so much easier.
You Too Can Create The Best Home Improvement Ideas Ever With These Newly Discovered Blueprints
Click here for FREE online ebook!
Previous Articles Highlighter:
Qualities Of Fabrics Explained (1)
If rolled on a bolt, the right side is usually inside. Napped fabrics are softer and fuzzier on the right side. If one side of a fabric is more lustrous than the other, the shinier is usually the right.
Tuning Your Sales Pitch (2)
Selling, in its larger sense, is the basis of human relationship; for, whenever two human beings converse, one sells the other something. It may be a thing, or it may be an idea, or it may be an ideal, or a personal impression.
Tools For Making Fishing Lures (3)
Pliers, files, screwdrivers and a sharp knife are the only other essential tools needed for making lures. With these tools, the fisherman is able to make any number of lures irresistible to fish.
How To Understand The Qualities Of Color (4)
A color in its full, natural strength may be called a "normal" color or a color of "normal" value. If lighter, we call it a "tint"; if darker, a "shade." These latter terms are so often abused that some authorities prefer the substitution of the word "value," as a "light value of blue" rather than a "tint of blue," or a "dark value of green" rather than a "shade of green." Thirdly, some colors are strong and some weak.
What To Do When The Bell Doesn't Ring (5)
This is normal. It does not indicate overloading, but only the internal molecular friction of the iron core of the transformer as the alternating current goes through its periodic reversals.
4 Keys To Selection Of The Quarterback (6)
We encourage the quarterbacks to answer possible questions of assignment during the practice week rather than allowing one of the coaches to supply the information. He must be able to call and sometimes change a given signal in a fraction of a second.
First Steps In Investing Explained (7)
How much should be the goal before further investment, with attendant higher risks, is attempted? The answer cannot be given in the form of an exact amount, because your total income and expenditures will have a bearing upon it; but most authorities agree that a "nest egg" or "rainy day fund" must first be obtained which is the equivalent of at least three months' salary.
Life Secrets Of The Orchid (8)
On entering any orchid flower the insect must first brush the empty stigmatic cavity in his search for the nectar or other food. Drunk with the repast, he blunders out, the narrow passage compelling him on the way to brush past the pollen masses, which become dislodged and, because of the sticky fluid, adhere to him.
Discover The Beauty Of Cut Roses (9)
Other flowers have only one season, but roses are available throughout the year. Yet, despite their relatively short-lasting properties, the whole world still regards the rose as possessing everything that goes to make the perfect flower.
Tools For Pottery Explained (10)
These come in a variety of shapes and sizes with a plain cutting edge or a toothed edge. Pallets are used for smoothing or scraping the surface of clay.
Newer Articles Highlighter:
How To Learn Positive Traits In Home Business Success (1)
A positive trait that one can learn greatly from them is firstly, their willingness to persevere in difficult period. We can witness great positive display of character as they overcome great challenges to achieve great success.
How To Clean Walls And Ceilings (2)
After that, apply fuller's earth or French chalk, brushing it off as it takes up the ink. If the stain is not removed completely by these methods, ink eradicator from the drugstore can be used, but it is likely to take out the color too.
Discover The Right Plants For Your Aquarium (3)
In a 24-inch tank therefore it is really not practicable to introduce more than three species. Choosing Plants When confronted with a huge variety of plants, there is a great temptation to take a piece of everything that appeals to you.
How To Begin At Golf (4)
Many have tried - and are still trying - but they cannot hope to improve unless they overhaul their swing completely because the swing habits they have formed are permanently ingrained within their muscle structure.
Understanding Prereading Skills For Preschoolers (5)
4. Practice in associating letter forms with their sounds. This is phonics. Parents may well leave this step to teachers, and merely reinforce the child's school learning by means of games like this: "I'll say three words: toy, tell, ten.
How To Set Up A Workshop For Furniture Making (6)
With your workshop set up thus, you are ready to start the important work of furniture making. Discover How To Build Your Own Amazing Furniture With Our Free Furniture Plans!
Exercises To Help With The Golf Backswing (7)
The second exercise (it could more properly be termed an expedient) is an aid to those who have trouble in keeping the weight on the inside of the right foot as the backswing develops, and the body turn takes place under the control of the right knee and right hip.
How To Teach A Parrot To Talk (8)
Have fun! Discover Parrot Training Secrets That Will Have Your Parrot Talking Up A Storm In 30 Days or Less - Guaranteed! Click here for FREE online Ebook www.parrotpicture.net
How To Prepare Hors D'Oeuvre (9)
Garnish each plate with two lemon wedges. A vinegar cruet and a pepper mill should be on the table. Artichokes Figaro Serves 6 One of the most beautiful public dining rooms on the East coast is that of the Sheraton-Carlton Hotel in Washington.
How To Help Your Child To Read (10)
Feelings are "like something" or "they are more or less than." Then to feel words we see what they are like - what they describe "more or less." The physical feeling of a word grows out of seeing, saying, and building it.